Table of Contents
Advertisement
Editing Test Parameters
The memory start parameters may be
edited by highlighting a memory start
and pressing the [ENT] key. From the
eight (8) primary selections, there are
many other selections available to
allow changing the data stored and
altering the test characteristics.
Soft keys at the bottom of the display
aid the editing process.
➢ [DEL] – deletes the
character to the left of the
cursor
➢ [CLEAR] – erases all
characters in the edit field
➢ [DEL] - deletes the character
to the right of the cursor
➢ [+/-] (Displayed only when
applicable) – changes the
polarity (pos/neg) of the number
If a number key is pressed without moving
the cursor, the current content will be
erased and the new key press entered.
Press [ENT] to save the changes or
[ESC] to abort the change and restore the
original content.
Entering or Changing Sample/Product Test Information
4.2.
When:
As needed
How:
From main test screen, press [Menu] and select "MEMORY START MENU"
To enter new parameters or edit old parameters
1:
Move cursor to a blank memory start position and press [ENT]
2:
Enter test parameters; (sample name, temperatures, etc.)
3:
Select the parameter, press [ENT], enter the new data or toggle the
selections, press [ENT] to save your changes
4:
Press [ESC] to return to the previous menu/s
5:
When finished, press [ESC] until you return to main test screen
To copy information from a similar memory start
1:
Select the memory start to be copied and press [COPY]
2:
Move highlight bar to an empty memory start position
Page 11 of 24
Advertisement
Table of Contents
