Table of Contents
Advertisement
3:
Press [INSERT]
4:
Change sample name and any other test criteria that might need to be
changed for running the new product
5:
When finished, press [Esc] until you return to main test screen.
To change test parameters within an existing memory start
1:
Select "MEMORY START MENU"
2:
Move cursor to memory start position you wish to make changes in and
press [ENT].
3:
Change appropriate test parameters such as temperature, sample size or
ending criteria (it's best to change only one parameter at a time when
trying to correlate with standard reference method values)
4:
When finished, press [ESC] until you return to main test screen.
Stored Data Menu
4.3.
This function is used to work with data
stored in the instrument from past moisture
determinations. Up to 1000 tests and 100
graphs can be stored before the oldest is
"pushed out" (overwritten). To access this
function, go to the Main Menu and select
the STORED DATA MENU. On 21 CFR,
Part 11 compliant units, the DELETE is not
available.
View Stored Data
This function is used to view a list of
results for a selected test. Move the
selector bar to a particular test and
press [VIEW] to display the data that
has been selected in the REPORT
ITEMS TO PRINT menu. There are
three (3) pages of data available and
selectable using the soft keys below the
display. Page 1 is shown at right.
Page 12 of 24
Advertisement
Table of Contents
