PhaserShare™ network and serial connections
SCSI connections
To obtain serial or network connections, one of the optional PhaserShareª
cards must be installed in the printer. A PhaserShare card can be purchased
initially with the printer or later as a separate upgrade kit. If purchased
initially, you will Þnd the network manuals, PhaserShare Network Cards and
Software System Administrator User Manual and PhaserShare Status Software
User Manual, included in the box with your printer.
PhaserShare network interfaces offer high performance and ßexible
workgroup connectivity. All data input ports and network protocols are
simultaneously active. Print jobs are processed on a Þrst-come, Þrst-served
basis.
To order the optional hardware, contact your local Tektronix reseller or call
Tektronix toll-free in the United States at 1-800-835-6100.
For detailed information on conÞguring and using the printer on networks,
refer to the PhaserShare Network Cards and Software System Administrator
User Manual.
The SCSI port is used for connecting these optional peripheral devices:
External font disk
(optional)
Refer to ÒAdding a hard disk for font storageÓ on page B-5 for
information on installing a hard disk.
Phaser Copystation accessory
Refer to Chapter 2 of the Phaser Copystation User Manual to set up
the Phaser Copystation.
(optional)
User Manual
2
Getting Set Up
2-23