Quick Collate; Check Print - Tektronix Phaser 550 User Manual

Quick Collate

Check Print

This feature, available with the extended features option, allows a user to
generate multiple copies of a multiple-page job so that the output is
produced in collated order. To set this print feature, you select it in the
driver by clicking on the check box. Refer to ÒUsing the Quick Collate
optionÓ on page A-8 for detailed information on how this option handles
collating multiple copies and on the memory requirements for the best
performance. Refer to the Phaser 550 Drivers and Utilities Printing Reference
for detailed information on selecting and using the Quick Collate option.
This feature is available with the extended features option. When sending a
Þle to the printer through the driver, you can select Check Print to preview
the Þrst page of the job and determine if the print is to your liking before
proceeding with the remainder of the job. This is especially useful when
printing a large job.
The ability to access Check Print from the driver is enabled and disabled in
the printerÕs front panel. You can also set the timeout in the front panel (the
timeout is the amount of time the printer will wait after sending the Þrst
page of a Þle, before it continues with the remainder of the job).
By default, access to Check Print is enabled, with a default timeout of
5 minutes.
For complete instructions on making this driver selection, refer to the
Phaser 550 Drivers and Utilities Printing Reference.
Printing
3-19
User Manual
3