Printing From Windows 3.1 And Windows Nt - Tektronix Phaser 550 User Manual

Printing from Windows 3.1 and Windows NT

Note
Printing from a PC through an interface port other than the
parallel port requires that an optional PhaserShare card be
installed in the printer.
Make sure that you have installed the printer software for
1.
Windows 3.1 or Windows NT, as described in Chapter 2. If you
have not, do so now.
From the Control Panel, double-click Printers.
1.
In the Printers window, select the Phaser 550 printer, then click
2.
Setup. A dialog box appears with the printerÕs name across the
top.
Click on any of the tabs along the top of the dialog box to view and
3.
make selections that control the print features (for example, the
Features tab controls resolution, color correction modes, and
installable options).
For information on print features, see ÒSelecting print featuresÓ on page 3-9.
Refer to the Phaser 550 Drivers and Utilities Printing Reference for detailed
information.
Printing
3-3
User Manual
3