Problems With Image Size And Position; Off-Set Images; Cut-Off Images; Image Shifts Or Margins Are Incorrect (Macintosh) - Tektronix Phaser 550 User Manual

Problems with image size and position

Off-set images

Check your application for correct image sizing.

Cut-off images

Check your application for image sizing.
Make sure that you are using a Phaser 550 PPD Þle and have
selected the correct page size. If you select the incorrect page size,
the image may be cut off.
Make sure that the correct size media is in the media tray.

Image shifts or margins are incorrect (Macintosh)

Make sure that you have installed the Phaser 550 GX printer
driver or the correct PPD Þle onto your Macintosh so that you can
select the correct page sizes from the driver. For details on the
LaserWriter driver, refer to the Phaser 550 Drivers and Utilities
Printing Reference.
For details on how to print from a Macintosh, refer to ÒPrinting
from a MacintoshÓ on page 3-7.
If printing on transparencies and you have a Lower Tray
Assembly installed, make sure that the transparency tray is
installed in the upper or middle slots (the bottom tray slot takes
only paper trays).
Troubleshooting
6-25
User Manual
6