What Happens At Power-Up; When The Printer Is Ready For Operation - Tektronix Phaser 550 User Manual

What happens at power-up

Both status indicators (power
front panel light brießy. Messages appear in the display panel
(LCD). The printer goes through a series of self-tests. The printer
takes a about 2 minutes to warm up and complete the self-tests
(depending on the amount of memory installed).
Exit
After the self-tests run successfully, the printer prints a startup
page and, if the printerÕs copy count is between Þve and eight
pages, a registration page. The startup page prints whenever you
turn on or reset the printer.
If you want to turn off the startup page, you can use the front panel menu or
a software utility Þle provided on the drivers and utilities diskettes (or
CD-ROM) included with your printer. Refer to ÒEnabling and disabling the
startup pageÓ on page A-5 and the Phaser 550 Drivers and Utilities Printing
Reference for details on using the utility Þle.

When the printer is ready for operation

When the power-up sequence is complete, the green indicator is on steady
(not blinking), the red indicator is off, and the front panel message reads
Ready.
Getting Set Up
and error ) on the printerÕs
9008-43
User Manual
2
2-25