Selecting Print Features - Tektronix Phaser 550 User Manual

Selecting print features

This printer provides Þve print-quality modes as well as TekColor color
corrections that you can select to customize your prints. Other print features
include tray selection, media size and media type. There are several ways to
select print features:
Through the printer driver
Print selections that are made using a supported printer driver
override the settings on the printerÕs front panel. Refer to the
Phaser 550 Drivers and Utilities Printing Reference for details on
selecting print features in the driver.
From the printer's front panel
Settings you make on the front panel are only used when printing
from a non-supported driver. Refer to the instructions included in
this chapter.
Note
For network setup protection, the front panel access to setup
parameters may be limited. Refer to "Protected mode for the front
panel menu" on page 7-4 for details.
Sending a PostScript utility file to the printer
Printer settings downloaded to the printerÕs front panel are only
used when printing from a non-supported driver. Refer to the
Phaser 550 Drivers and Utilities Printing Reference for information on
sending utility Þles to the printer.
Using PhaserLink software
If your network is running TCP/IP and you have a World Wide
Web browser (such as Netscape or Mosaic), you can use this
browser to view printer status and select printer features. Refer to
the PhaserShare Status Software User Manual for complete
information.
Printing
3-9
User Manual
3