Network Event Logs (Phaser 850) - Tektronix PHASER 840 Service Manual

Network Event Logs (Phaser 850)

The Phaser 850 printer maintains three logs in memory detailing network
functions. The logs contain TCP/IP and Netware initialization landmarks and
limited print-time processes. The log also shows the state of the networking
hardware.
The logs are useful for troubleshooting network setup problems and isolate
network problems from printer problems. The log indicates that network
hardware is properly functioning with messages like "NETWORK HARDWARE
PROVEN GOOD USING IPX"
The logs can be accessed through the front panel menu.
1. Navigate to Menu/ Printer Configuration/ Network Setting/ Network
Logs.
2.
Scroll to Hardware Startup Log or TCP/IP Startup Log or NetWare
Startup Log and press Select.
The log can also be accessed remotely via PhaserLink 2.0.
The logs lists events chronologically. The log is limited in length; logging stops
when the log is full. The log is stored in RAM only so new data is stored each
time the printer's power is cycled.
56 Phaser 840 and 850 Color Printers