Enabling And Disabling The Startup Page - Tektronix Phaser 550 User Manual

Enabling and disabling the startup page

You can enable and disable printing of the startup page in three ways:
On a PC, send a PostScript language utility Þle to the printer. For
more information, refer to the Phaser 550 Drivers and Utilities
Printing Reference.
On a Macintosh, use the LaserWriter utility.
Through the printerÕs front panel, according to the following
instructions:
While the Ready message is displayed, press the Menu button.
1.
The printer displays the Þrst item in the setup menu:
Help Pages
<----
Using the left arrow (<---) or right arrow (--->) buttons,
2.
scroll through the selections until the following message
appears:
Printer Defaults
<----
Press the Menu button to access the printer defaults settings.
3.
Using the left arrow (<---) or right arrow (--->) buttons,
4.
scroll through the selections until the following message
appears:
Startup Page
<----
Press the Menu button to access the startup page settings.
5.
Press the right arrow (--->) button once for the following
6.
message:
Startup Page:disabled
<----
Press the OK button to disable printing of the startup page.
7.
To return to the top level of the menu, press the
8.
until the printer displays the Ready message.
----> Menu
----> Menu
----> Menu
----> OK
A
Technical Notes
button
Exit
A-5
User Manual