Operational Safety Information; Electrical Supply - Xerox Phaser 4600DN User Manual

Safety

Operational Safety Information

Your Xerox machine and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards. To ensure the continued safe operation of your Xerox machine, follow these safety
guidelines at all times:

Electrical Supply

This section provides important electrical supply safety information that you should read before
installing or using the machine.
Read the information in the following sections:
• Power Outlet Electrical Safety
• Power Cord Electrical Safety
• Laser Safety Information
• Machine Safety on page 133.
• Emergency Power Off
• Disconnect Machine
Power Outlet Electrical Safety
This machine must be operated from the type of electrical supply indicated on the data plate label
located on the rear cover of the machine. If you are not sure that your electrical supply meets the
requirements, please consult your local power company or a licensed electrician for advice.
The electrical supply outlet should be installed near the machine and should be easily accessible.
WARNING: This machine must be connected to a protective earth circuit. This machine is
supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a
licensed electrician to replace the outlet. Always connect the machine to a correctly grounded
power outlet. If in doubt, have the outlet checked by a qualified electrician. Improper connection
of the machine-grounding conductor can result in electrical shock.
Power Cord Electrical Safety
• Use only the power cord supplied with this machine.
• Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If you
do not know whether or not an outlet is grounded, consult a qualified electrician.
• Do not place this machine where people might step on or trip on the power cord.
• Do not place objects on the power cord.
132 Xerox Phaser 4600/4620
User Guide
on page 132.
on page 132.
on page 133.
on page 134.
on page 134.