General Setup; Machine Settings - Xerox Phaser 4600DN User Manual

Setups
Line Termination
Wide A4
5. Press the up/down arrows to highlight the option required and press OK.
6. Press the up/down arrows to highlight the setting required and press OK to save the selection.
7. Continue customizing the PCL Setup options as required, then press Stop to return to ready mode.

General Setup

The Print Quality Mode directly controls the quality of your prints. Set the default Print Quality Mode
required.
1. Press the Menu button on the control panel.
2. Press the up/down arrows to highlight Tools and press OK.
Note If a password is required, refer to
3. Press the up/down arrows to highlight Setup and press OK.
Press the up/down arrows to highlight General Setup and press OK.
4.
5. Press the up/down arrows to highlight Print Quality Mode and press OK.
The following Print Quality Mode options are available:
600 x 600 dpi
1200 x 1200 (Enhanced)
Draft Mode
6. Press the up/down arrows to highlight the setting required and press OK.
7. Press Stop to return to ready mode.

Machine Settings

Press the Menu button on the control panel.
1.
2. Press the up/down arrows to highlight Tools and press OK.
Note If a password is required, refer to
3. Press the up/down arrows to highlight Setup and press OK.
4. Press the up/down arrows to highlight Machine Settings and press OK.
82 Xerox Phaser 4600/4620
User Guide
Option
Accessing Tools
Option
Accessing Tools
Description
Sets the default line termination.
Sets the printable area of A4 paper size to 80 10-
pitch characters.
on page 78 for instructions.
Description
Best general-purpose mode for high-speed
printing. Produces crisp, bright prints.
Highest-quality prints with best detail.
Recommended for photo prints.
This mode saves toner and is suitable for draft
printing.
on page 78 for instructions.