Xerox Phaser 4600DN User Manual page 105

Location Errors & Faults
CRU Toner Low
Toner Empty
Toner Cartridge Not
Installed
Toner Supplying Error
Invalid Toner Cartridge
Output Output Tray Full
Areas
Staple Cartridge Not
Installed
Stapler Fault
Description
Toner Cartridge is almost
empty.
Toner Cartridge is empty.
The Toner Cartridge is not
installed or not installed
correctly.
Toner is not being supplied
correctly.
The installed Toner Cartridge
is not a valid Xerox cartridge.
Output tray full.
Staple cartridge not installed.
Stapler unit does not work.
General Care and Troubleshooting
Solution
Open top cover. Remove Toner
Cartridge and gently shake it. By
doing this, printing operations can
be temporarily resumed.
Reinstall Toner Cartridge. Close top
cover. Reorder Toner Cartridge.
Open top cover.
Replace with new Toner Cartridge.
Install the Toner Cartridge.
If already installed, check it has
been installed correctly.
If problem persists, call for service.
Check the Toner Cartridge is
installed securely.
Check the Toner Cartridge and
install a valid Xerox cartridge if
necessary.
If problem persists, call for service.
Remove printed material from
Output tray.
Install staple cartridge.
Open stapler door and check the
stapler. Close stapler door.
If the fault persists, Power Off /
Power On.
If the problem persists, call for
service.
Xerox Phaser 4600/4620
User Guide
105