Page 1 Xerox DocuPrint Network Printer Series Installation Planning Guide for Models 96/4635/180 NPS Version 7.1 $XJXVW 2000 721P88381...
Page 2 Xerox The Document Company, the stylized X, and all Xerox ·, product names mentioned in this publication are trademarks of Xerox Corporation. Products and trademarks of other companies are also acknowledged. Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.
Page 3: Ozone Information
Laser safety Ozone information Operation safety XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Warning: Adjustments, use of controls, or performance of procedures other than those specified herein may result in hazardous light exposure. The Xerox DocuPrint printers are certified to comply with the performance standards of the U.S.
Page 4 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • Always use materials and supplies specifically designed for your Xerox equipment. Use of unsuitable materials may result in poor performance and may create a hazardous situation. •...
Page 5: Table Of Contents
Controller software 3. Printer components and options Printer components Printer configurations Printer options XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table of Contents Contents Conventions Client workstations and system software Supported hardware and operating systems...
Page 6 Bypass transport specifications Space planning guidelines Printer hardware specifications and requirements summary Space planning templates XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Xerox responsibilities Customer responsibilities Novell network information DocuPrint as a print server (PSERVER)
Page 7 Xerox Documentation and Software Services (XDSS) Operator training Xerox Customer Education Xerox Font Center C. Related publications XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Routine maintenance Meter reading and reporting Selecting paper Paper width and printer performance...
Page 8 DocuPrint NPS as a print server or as a remote printer Novell configuration Glossary Index viii XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Print queues Queue to printer relationships PCONSOLE Print server (PSERVER) Job parameters...
Page 9: About This Guide
About this guide Contents XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS This Xerox Printing Systems Installation Planning Guide helps you prepare for delivery and installation of your new Xerox DocuPrint printing system. This guide is intended for the person responsible for coordinating the installation of the DocuPrint printer at your site.
Page 10: Notice
INTRODUCTION Conventions Notice XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • Appendix A, "Supplies," describes how to select, store, and use supplies for the DocuPrint printing system. It also provides a list of consumable supplies you can order.
Page 11: Product Overview
System overview XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 1Product overview This chapter provides an overview of the features and functions of the following Xerox DocuPrint Network Printing Systems (NPS): • 96 NPS • 96 MICR NPS •...
Page 12 PRODUCT OVERVIEW XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS One or more of the following network communication systems may be used to transport documents from the client workstation to the printer: • Ethernet local area network (LAN) running Transmission Control Protocol/Internet Protocol (TCP/IP), AppleTalk, or Novell NetWare network protocol software.
Page 13 Customer-supplied client PC or workstation Customer-supplied network Xerox-supplied printer controller XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following illustrates the DocuPrint 96/4635/180 NPS and 96/4635/180 MICR NPS system components Figure 1-1. DocuPrint Model 96/4635/180 NPS and...
Page 14 254 mm) paper may be used with the optional 7 by 10 inch enablement feature. The DocuPrint 180 NPS and 180 MICR NPS print data at a rate of up to 180 pages per minute, or up to 206 pages per minute with the smaller, 7 by 10 inch (178 by 254 mm) paper used with the optional 7 by 10 inch enablement feature.
Page 15: Client Workstations And System Software
Supported hardware and operating systems Client networking software XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS To send print jobs to the DocuPrint NPS printer, the customer needs to provide the proper client hardware as well as operating system and network software.
Page 16: Ethernet Lan
Token Ring Fiber Distributed Data Interface NPS/IPS Dual Mode XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Users of networked client workstations may send print jobs to the DocuPrint NPS printer over the Ethernet LAN using TCP/IP, AppleTalk using EtherTalk Link Access Protocol (ELAP), or Novell NetWare 3.1x as the network protocol.
Page 17: Micr Printing Features
MICR printing features Unsupported features XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The DocuPrint 96 MICR NPS, 4635 MICR NPS, and 180 MICR NPS produce a Magnetic Ink Character Recognition (MICR) line on negotiable and turnaround documents such as checks and bills. The...
Page 18: Sixth Sense
Sixth Sense XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Xerox provides a set of 300 dpi E13B and CMC7 MICR fonts for use with your 96/4635/180 MICR NPS. To receive the high print quality guaranteed by Xerox, you must use these MICR fonts.
Page 19: Controller Hardware
Controller hardware Sun Ultra 2 workstation XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 2Controller components and The printer controller provides the printer with print data and commands, and receives status information from the printer. This chapter describes the components and options available for the controller.
Page 20 CONTROLLER COMPONENTS AND OPTIONS Processor XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Figure 2-1. Components of the Sun Ultra 2 workstation Processor Monitor Mouse and mouse pad Keyboard Diskette drive CD-ROM drive The 256 MB RAM processor is the central processing unit of the Sun workstation.
Page 21 Display monitor XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER COMPONENTS AND OPTIONS • CD-ROM drive: The CD-ROM drive is a high density, read-only, optical laser storage device used for loading the NPS operating system and other files. The CD-ROM drive is located in the processor above the diskette drive.
Page 22: Sun Ultra 60 Workstation
CONTROLLER COMPONENTS AND OPTIONS Keyboard Sun Ultra 60 workstation XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The keyboard consists of alphanumeric keys similar to a typewriter, symbols and special character keys, an extended character set, and function keys.
Page 23 Processor XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER COMPONENTS AND OPTIONS Figure 2-3. Components of the Sun Ultra 60 workstation Monitor Keyboard Mouse Processor Diskette drive CD-ROM drive Cartridge tape drive The 256 MB RAM processor is the central processing unit of the Sun Ultra 60 workstation.
Page 24 CONTROLLER COMPONENTS AND OPTIONS XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • Cartridge tape drive: A 4 GB external SCSI quarter inch cartridge (QIC) tape drive is an external device provided with the printing system. The cartridge tape drive connects to the controller through the SCSI port on the processor back panel.
Page 25 Display monitor Keyboard XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER COMPONENTS AND OPTIONS Figure 2-5. Back panel of the Sun Ultra 60 processor Power inlet Fan vent Online interface (if configured) Differential SCSI PWB (optional)
Page 26 CONTROLLER COMPONENTS AND OPTIONS XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Mouse The mouse is another main method of communicating with the printer. The mouse has three buttons. The left and right buttons are used to select NPS functions. The center button provides additional functions that you will not be required to use.
Page 27: Controller Software
Controller software XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER COMPONENTS AND OPTIONS The installation of printer controller software is performed by your service representative once all the hardware components are in place and properly connected. The following is a summary of major software components installed on the printer controller: •...
Page 28 CONTROLLER COMPONENTS AND OPTIONS 2-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS — ITC Zapf Dingbats Using font installation commands, you can load other Type 1 PostScript fonts in .PFB file format from an MS-DOS- formatted, 3.5-inch diskette or CD-ROM.
Page 29: Printer Components And Options
Printer components XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 3Printer components and The printer processes the electronic data and images received from the controller and produces the printed report. This chapter describes the components and options available for the printer.
Page 30: Printer Control Console
PRINTER COMPONENTS AND OPTIONS Printer control console XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Refer to the System Overview manual for a detailed description of the features and operation of the printer components. The printer control console is the color monitor located on top of the printer.
Page 31 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Figure 3-2. Printer control console Ready Printer Options Language icon Printer icon Fault List icon Tools icon Guarded Tools icon Clear button Continue button Stop button Sample button...
Page 32: Printer Configurations
PRINTER COMPONENTS AND OPTIONS Printer configurations XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The 96, 4635, and 180 systems are available in different basic configurations, illustrated below. These configuration options allow you to customize your Xerox DocuPrint 96/4635/180 printers for increased efficiency and for specialized applications.
Page 33 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER COMPONENTS AND OPTIONS Figure 3-5. 4635/180 printer—Inverter feeder/stacker + feeder/ stacker + feeder/stacker Figure 3-6. 4635/180 printer—Inverter feeder/stacker + feeder/ stacker + feeder/stacker + feeder/stacker Note: The bypass transport is not available on this configuration (printer and inverter feeder/stacker plus three feeder/stackers).
Page 34: Printer Options
PRINTER COMPONENTS AND OPTIONS Printer options Bypass transport XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The bypass transport and input enablement options provide an interface between your DocuPrint system and your finishing and feeding accessories. However, these feeding and finishing options require separate AC and DC power sources that are independent of your printer.
Page 35 Bypass transport printer configurations XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER COMPONENTS AND OPTIONS The following 96/4635/180 printer configurations may have the bypass transport: Figure 3-7. 96 printer with inverter feeder/stacker + bypass transport...
Page 36: Input Enablement
PRINTER COMPONENTS AND OPTIONS Input enablement XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Adding a third-party feeder to your DocuPrint system is made possible by the input enablement option. The DocuPrint 96/4635 printers accept cut sheets from the feeding device through an entry slot at the lower right side of the last feeder/stacker module.
Page 37: Configurations Supported
Configurations supported 96 configurations 4635 configurations 180 configurations XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER COMPONENTS AND OPTIONS The input enablement kit and/or bypass transport are supported on the 96/4635/180 configurations as follows: Input enablement kit and/or bypass transport: •...
Page 38 PRINTER COMPONENTS AND OPTIONS 3-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 39: Responsibilities
Responsibilities Xerox responsibilities XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 4Preparing for installation This chapter assists you in preparing for the installation of your Xerox DocuPrint 96/4635/180 NPS and 96/4635/180 MICR NPS. Preparing for installation is a responsibility shared by personnel at your site and Xerox.
Page 40: Customer Responsibilities
PREPARING FOR INSTALLATION Customer responsibilities Site personnel Operator and systems training XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • Training — Provide initial operator training — Provide information and assistance in registering for Xerox Customer Education classes or obtaining tutorials.
Page 41 DocuPrint system as client platforms. Applications Work with your Xerox systems analyst to determine requirements for initial applications. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 42: Installation Planning Checklist
Sixth Sense installations. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS To aid you in printer installation planning, the following is a checklist that lists the tasks that you and your service representative must complete before installation.
Page 43 • Check documentation and software kits for completeness. • Have test jobs ready to run. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table 4-1.96/4635/180 NPS installation planning checklist (continued) Reference Responsibility Xerox Chapter 4, Appendix...
Page 44 • Provide ongoing printer controller and DocuPrint printer maintenance. • Adjust the IOT alignment and magnification. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table 4-1.96/4635/180 NPS installation planning checklist (continued) Reference Responsibility Appendix B Customer...
Page 45: Nps Network Installation Checklist
• If you are on a TCP/IP network, assign a valid IP netmask. • If you are not on a TCP/IP network and you used the Xerox- supplied IP address value (192.9.200.1), use 255.255.255.0 for the IP netmask. PREPARING FOR INSTALLATION...
Page 46 Xerox client software UNIX command tool XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Series of four integers between 0 and 255 separated by a period, such as 188.9.234.1, to specify a default router. Most TCP/IP networks broadcast routing information.
Page 47: Docuprint As A Print Server (Pserver)
Retry count Novell network information DocuPrint as a print server (PSERVER) XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Determine whether the DocuPrint NPS system supports a print production environment, or whether the system remains unattended.
Page 48: Docuprint Nps As A Remote Printer (Rprinter)
LAN network number Network framing type 4-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Provide the following information to the service representative if you configure DocuPrint NPS as a remote printer on the Novell network (for further information, refer to the “Installation”...
Page 49 AppleTalk Network Information AppleTalk Phase 1 or 2 AppleTalk zone name Network device used for the AppleTalk protocol XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table 4-2.Preinstallation checklist PREPARING FOR INSTALLATION Information you supply Information you supply...
Page 50: Fiber Distributed Data Interface Specifications
Token Ring specifications Fiber Distributed Data Interface specifications 4-12 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS A Token Ring network or an Ethernet local area network (LAN) running Transmission Control Protocol/Internet Protocol (TCP/IP), AppleTalk, or Novell NetWare software is the network communication system used to transport documents from the client workstation to the printer.
Page 51: Controller Specifications And Requirements
Sun Ultra 60 printer controller 100 to 240 VAC Sun Ultra 2 printer controller Sun Ultra 60 printer controller 100 to 240 VAC XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 5Controller specifications and This chapter provides power and space requirements for your 96/4635/180 NPS printer controller.
Page 52: Outlet Configurations
CONTROLLER SPECIFICATIONS AND REQUIREMENTS Outlet configurations XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS This section discusses specifications for system outlets and the required wall outlet configurations for the USA / Canada and internationally. Note: All power outlets must be dedicated to this equipment. When...
Page 53: Printer Controller Placement
Space requirements Printer controller placement XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER SPECIFICATIONS AND REQUIREMENTS This section provides recommendations for placement of printer controller hardware components. For printer component space requirements, refer to the “Printer specifications and requirements”...
Page 54: Sun Ultra 2 Workstation Placement
CONTROLLER SPECIFICATIONS AND REQUIREMENTS Sun Ultra 2 workstation placement XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Following are guidelines for placement of the Sun Ultra 2 workstation components of the printer controller. Figure 5-2. Sun Ultra 2 printer controller hardware...
Page 55 Processor clearance XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER SPECIFICATIONS AND REQUIREMENTS When you place your workstation processor on a table top, make sure to allow at least 6 inches / 15.2 cm of unobstructed space at the rear and both sides of the processor.
Page 56: Sun Ultra 60 Workstation Placement
CONTROLLER SPECIFICATIONS AND REQUIREMENTS Sun Ultra 60 workstation placement XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Following are guidelines for placement of the Sun Ultra 60 workstation components of the printer controller. Figure 5-4. Sun Ultra 60 printer controller hardware...
Page 57 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER SPECIFICATIONS AND REQUIREMENTS The following illustration shows fan and vent locations on the front and back of the controller. Figure 5-5. Sun Ultra 60 fan and vent locations to keep clear...
Page 58: Printer Controller Hardware Specifications And Requirements Summary
(optional) Keyboard W=18 in. (45.7 cm) D=7.5 in. (17.8 cm) XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following table summarizes the specifications and electrical requirements of your DocuPrint NPS printer controller hardware components. For a summary of printer hardware specifications and requirements, refer to the “Printer specifications and requirements”...
Page 59 Mouse W=4 in. (11 cm) H=2 in. (5 cm) D=3 in. (8 cm) XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS CONTROLLER SPECIFICATIONS AND REQUIREMENTS Table 5-3.96/4635/180 NPS printer controller specifications and power requirements (continued) Heat...
Page 60 CONTROLLER SPECIFICATIONS AND REQUIREMENTS 5-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 61 Printer— 50 Hz DELTA 4635 (Star) 4635 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 6Printer specifications and This chapter provides power and space requirements for your 96/4635/180 printer. It also provides printer environmental specifications. For facts about controller power and space requirements, refer to the “Controller specifications and requirements”...
Page 62: Outlet Configurations
4 Wire 4 Wire 4 Wire 4 Wire XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS This section discusses specifications for system outlets and the required wall outlet configurations for the USA / Canada and internationally.
Page 63 Printer power outlet/cord voltage configurations—60 Hz XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The following figures shows the 60 Hz power outlet configuration for 50 amp NEMA 14-50R (96, 4635, and 180) and 30 amp NEMA 14- 30R (180 only).
Page 64: Printer Outlet Voltages-50 Hz
5 Wire 415 V 5 Wire 415 V XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS All power outlets must have a dedicated circuit for each system equipment piece. Make sure each power cord has a separate circuit.
Page 65 5 Wire 400 V Printer power outlet/cord voltage configurations—50 Hz XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The following lists the 50 Hz WYE/Star printer outlet information for 380 and 400 volts.
Page 66: Environmental Specifications
PRINTER SPECIFICATIONS AND REQUIREMENTS Environmental specifications XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS When you select a site location for your DocuPrint printer, avoid environments with extreme variations in temperature and other hazards, such as excessive dust or humidity. Recommended environmental ranges for the work area are as follows: Table 6-6.
Page 67: Space Requirements
Space requirements Printer placement XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS You should consider the following factors when deciding where to place the printing system hardware components: • Adequate work space and service clearance around the equipment •...
Page 68 PRINTER SPECIFICATIONS AND REQUIREMENTS 96 printer with inverter feeder/stacker XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The dimensions of the printer with the inverter feeder/stacker-only only configuration are as follows: Dimension Width: Depth: Height: Total weight:...
Page 69 96/4635/180 printer with inverter feeder/ stacker and one feeder/stacker XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The dimensions of the printer with the inverter feeder/stacker and feeder/stacker are as follows: Dimension...
Page 70 PRINTER SPECIFICATIONS AND REQUIREMENTS 4635/180 printer with inverter feeder/ stacker and two feeder/stackers 6-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The dimensions of the printer with the inverter feeder/stacker, and two feeder/stackers are as follows: Dimension...
Page 71 4635/180 printer with inverter feeder/ stacker and three feeder/stackers XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The dimensions of the printer with the inverter feeder/stacker and three feeder/stackers are as follows:...
Page 72: Bypass Transport Specifications
PRINTER SPECIFICATIONS AND REQUIREMENTS Bypass transport specifications 6-12 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The bypass transport option enables you to add a third-party finishing device to your 96, 4635, or 180 printer. The bypass transport is installed by your service representative and remains permanently in place.
Page 73 2.2 in / 56 mm Floor XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The following figure shows the dimensions of the bypass transport in millimeters and inches from the right end view.
Page 74 PRINTER SPECIFICATIONS AND REQUIREMENTS Service access 6-14 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following figure provides space planning information and service access requirements for the bypass transport from a top view. Figure 6-8.
Page 75 Bypass transport paper path XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The following figure shows the paper path through the bypass transport from a front view. Figure 6-9. Bypass transport paper path...
Page 76 4 in / 101.5 mm Frame datum 6-16 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following figure shows the paper path and the dimensions of the input enablement area from a printer front view. The input enablement kit supports third-party feeding devices.
Page 77: Configuration Diagrams With Bypass Transport
Configuration diagrams with bypass transport 36 in / 91.4 cm XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following diagrams show the dimensions and space requirements of the 96, 4635, and 180 with a bypass transport.
Page 78 38.8 in / 98.6 cm 36 in / 91.4 cm 6-18 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Figure 6-12. 96/4635/180 printer—inverter feeder/stacker + feeder/stacker configuration with bypass transport 36 in / 91.4 cm 170 in / 431.8 cm...
Page 79 38.8 in / 98.6 cm 36 in / 91.4 cm XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS Figure 6-13. 4635/180 printer—inverter feeder/stacker + feeder/ stacker + feeder/stacker configuration with bypass transport Back 36 in / 91.4 cm...
Page 80: Space Planning Guidelines
Clearance space requirements Shared space 6-20 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS When determining your space requirements and planning for shared space between your printers, it is important to consider all of the components you plan to install.
Page 81 Back-to-back shared space 192.6 in / 489.2 cm XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS 4635, 96, or 180 printer feeders and stackers. Consult with your Xerox representative to ensure all the requirements are met.
Page 82 74 in / 188 cm 6-22 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following figure shows the two printers facing each other. The printers share 12 inches / 30.5 cm of the general service space, but not the exclusive operator area in front of each printer.
Page 83 514.6 cm 10.5 in / 26.7 cm XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The following figure shows the two printers arranged with one facing the back of the other. Between them is 60 inches / 152.4 cm of space.
Page 84: Floor Leveling
Floor leveling Delivery access requirements 6-24 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS For proper operation, the printer must be perfectly level. On floors less than two degrees out of level, installation personnel use a leveling kit to level the machine.
Page 85: Turning Radius
Turning radius Using the turning radius tables XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS You must also consider the width of the passageway when the equipment must negotiate a corner, whether into a room, an elevator, or another passageway.
Page 86 Turning radius for printer with separated components 6-26 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The 96, 4635 or 180 is delivered with the printer, inverter feeder/ stacker, and each feeder/stacker as separate modules. If necessary, the printer can be separated into two pieces for ease in moving.
Page 87 Turning radii for feeder/stacker modules XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The following table lists the turning requirements for the printer when attached to the paper handling module (not separated).
Page 88 PRINTER SPECIFICATIONS AND REQUIREMENTS 6-28 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following table lists the turning requirements for the feeder/ stacker module. Table 6-11. Turning radius for feeder/stacker module Passage or doorway A width 29 inches / 73.7 cm...
Page 89: Printer Hardware Specifications And Requirements Summary
Inverter feeder / stacker + feeder / stacker XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS The following table summarizes the specifications and electrical requirements of your printer hardware components. For a summary of controller hardware specifications and requirements, refer to the “Controller specifications and...
Page 90 4635/180 printer: Inverter feeder / stacker + two feeder / stackers 6-30 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table 6-12.Printer specifications and power requirements—96/ 4635/180 (continued) Dimensions (depth, width, height) Weight d=38.8 in. / 98.6 cm 3,109 lbs.
Page 91 Inverter feeder / stacker + three feeder / stackers Bypass transport XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PRINTER SPECIFICATIONS AND REQUIREMENTS Table 6-12.Printer specifications and power requirements—96/ 4635/180 (continued) Dimensions (depth, width, height) Weight d=38.8 in.
Page 92: Space Planning Templates
PRINTER SPECIFICATIONS AND REQUIREMENTS Space planning templates 6-32 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The dimensions and space requirements for your printer components are provided earlier in this chapter. The space planning templates are designed to simplify the space planning process by helping you to create a floor plan for your base components, particularly if you have shared clearance space.
Page 93 PRINTER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 6-33...
Page 94 PRINTER SPECIFICATIONS AND REQUIREMENTS 6-34 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 95 PRINTER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 6-35...
Page 96 PRINTER SPECIFICATIONS AND REQUIREMENTS 6-36 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 97 PRINTER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 6-37...
Page 98 PRINTER SPECIFICATIONS AND REQUIREMENTS 6-38 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 99: Grid Pattern
GRID PATTERN 1/4 inch represents one foot 14 15 16 17 18 19 9 10 11 12 13 20 21 22 23 24 25 26 27 28...
Page 101: Cable Lengths
Cable lengths Data cables Power cables XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 7System connections This chapter provides cable requirements for your 96/4635/180 NPS system. To ensure all of your cable requirements are met, it is important to work with your Xerox representative.
Page 102: Cable Locations
SYSTEM CONNECTIONS Cable locations XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS To run the cables beneath the flooring effectively, it is necessary to know where the cables enter and exit the printer. The following diagrams show those locations (marked with an X).
Page 103: Installation Process
Installation process XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS This chapter describes the activities performed by you and Xerox during the installation of the Xerox DocuPrint 96/96 MICR NPS, 4635/4635 MICR NPS, and 180/180 MICR NPS, and hardware and software components.
Page 104: Your Responsibilities
INSTALLATION Your responsibilities XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 7. Xerox personnel review preventive maintenance schedules and service call procedures. Xerox is responsible for the physical installation of the printer components and for loading the software and applications. You have the general site responsibility of ensuring that the right personnel, supplies, and network information are available.
Page 105: Software Licensing
Software licensing XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS When an NPS is purchased, the owner needs to receive a license to use the operating system software. Once a user calls in with a host ID, (Sun SPARC/Ultra host ID), the user receives a license string.
Page 106: Ongoing Maintenance
Routine maintenance Meter reading and reporting XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS After the installation of your Xerox DocuPrint NPS, there are a few ongoing tasks that must be performed. These tasks may include the following: •...
Page 107: Paper And Other Throughput Stocks
Acceptable paper stocks and sizes Recommended weight and grade: XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS This appendix provides information and specifications for the media you use with your Xerox DocuPrint 96, 4635, or 180 printer.
Page 108 SUPPLIES Characteristics Special stocks XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Use paper within these parameters: • Lightest: 16-pound or 65 gsm bond • Heaviest: 110-pound or 200-gsm index. Note: It is recommended that you use 24-pound paper with MICR applications, or paper specified by your local banking regulatory authority.
Page 109: Paper Width And Printer Performance
Paper width and printer performance XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • Perforated paper • Pre-cut or full tabs • Carbonless paper. Note: The 96/4635/180 printer can print on precollated or ordered stocks, including ordered tabs. However, jam recovery is not supported with these stocks.
Page 110 SUPPLIES Paper size/pitch mode minimum and maximum XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-3. Throughput data: 180 printer Pitch Paper width 7 to 7.4 in. / 178 to 188 mm 7.4 to 9.01 in. / 188 to 229 mm 9.01 to 10.19 in.
Page 111 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following figure illustrates the maximum and minimum paper sizes supported in 8-pitch mode. Figure A-1. 8-pitch mode paper sizes (4635 and 180 only) (364 mm) 10 in...
Page 112 SUPPLIES Feed direction for some standard paper XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following figure illustrates the maximum and minimum paper sizes supported in 3-pitch mode. Figure A-2. 3-pitch mode paper sizes 15.31 in...
Page 113 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Figure A-4. A3 (297 by 420 mm) paper feeding (short edge feed) 11.69 in (297 mm) US Papers The following diagrams show how US Letter and US Ledger (or US Tabloid) paper sizes feed through the printer.
Page 114 SUPPLIES XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS B4 Papers There are two sizes of B4 paper—European or ISO (9.84 by 13.89 inches / 250 by 353 mm) and Japanese or JIS B4 (14.33 by 10.12 inches / 364 by 257 mm).
Page 115: Paper Care
Paper care Storing paper XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Once you have purchased your paper, you must be sure it is stored and conditioned properly, so that it performs optimally in the printer with a minimum of jams.
Page 116 SUPPLIES Conditioning paper A-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Figure A-10. Recommended temperature and humidity for paper storage Because temperature and humidity affect paper performance in the printer, you need to condition paper before using it. To do this, store paper for a specified length of time in the same type of environment as your printer.
Page 117 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-4.Paper conditioning: Recommended temperature differences between storage and operating areas Temperature differences between storage and operating areas Fahrenheit Centigrade Cartons Hours Example: (See the shaded rows in the table above.) If you want to...
Page 118: Other Supplies
MICR dry ink is the magnetic black powder which forms the image on the printed MICR document. There are three cartridges of MICR dry ink in each carton. The consumption rate of Xerox MICR dry ink is approximately one cartridge per 60,000 pages. Use only MICR dry ink in your 96/4635/180 MICR printer.
Page 119: Cartridge Tapes
Additional fonts may be ordered from your local Xerox Font Center. Custom fonts and graphic images such as company logos and signatures can be digitized by the Xerox Font Center for use on your printer. Fonts are received on a diskette from your local Xerox Font Center.
Page 120: Micr Tools
MICR tools MICR Positioning and Dimension Gauge MICR comparator A-14 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS You can use the following tools to determine whether the MICR output is printing within MICR specifications: •...
Page 121: Consumable Supplies Tables
** Rainbow pack contains 750 sheets each of blue and yellow, 500 sheets each of green and pink, and 250 sheets each of buff, gray, goldenrod, and ivory. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS A number of supplies are available from Xerox for your DocuPrint printer.
Page 122 ** Rainbow pack contains 750 sheets each of blue and yellow, 500 sheets each of green and pink, and 250 sheets each of buff, gray, goldenrod, and ivory. A-16 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-5.Stocks list for 96/4635/180 printers (continued) Description Dual Purpose Colors—Green...
Page 123 ** Rainbow pack contains 750 sheets each of blue and yellow, 500 sheets each of green and pink, and 250 sheets each of buff, gray, goldenrod, and ivory. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-5.Stocks list for 96/4635/180 printers (continued)
Page 124 ** Rainbow pack contains 750 sheets each of blue and yellow, 500 sheets each of green and pink, and 250 sheets each of buff, gray, goldenrod, and ivory. A-18 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-5.Stocks list for 96/4635/180 printers (continued) Description Xerox transparencies are packaged 100 sheets to a box.
Page 125 * All papers are packaged 500 sheets per ream, with 10 reams per carton. Each ream contains only complete carbonless sets (i.e., 501 sheets in a three-part ream for 167 sets). XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-6.Carbonless stocks for 96/4635/180 printers...
Page 126 * All papers are packaged 500 sheets per ream, with 10 reams per carton. Each ream contains only complete carbonless sets (i.e., 501 sheets in a three-part ream for 167 sets). A-20 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-6.Carbonless stocks for 96/4635/180 printers Sheets per...
Page 127: Supplies
4mm blank cartridge tape, 5GB 4mm blank cartridge tape, 8GB XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The following table lists the supplies in addition to paper that are available for your printer. Use this table to help you determine your supplies needs.
Page 128: Ordering Supplies
SUPPLIES Ordering supplies A-22 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS To avoid unnecessary downtime, always have an adequate amount of the necessary supplies. To do this, you need to establish a procedure for checking and ordering supplies. A supplies checklist is provided at the end of this chapter to help you with this task.
Page 129 SUPPLIES The following table is a checklist you can use to keep track of the supplies you order. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS A-23...
Page 130 SUPPLIES A-24 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 131 Item Description and part number Quantity Date to order Date ordered Paper Transparencies Labels Dry ink MICR dry ink Developer MICR developer Fuser agent XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS A-25...
Page 132 Item Description and part number Floppy disks Cleaning supplies A-26 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Table A-8. Supplies checklist for 96/4635/180 printer Quantity Date to order Date ordered...
Page 133: Xerox Customer Service Support Center
Xerox Customer Service Support Center XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS BXerox support services Xerox provides many services in support of your laser printing system. This appendix contains information on the following services: •...
Page 134: Xerox Printing Systems Customer Support Center
XEROX SUPPORT SERVICES Xerox Printing Systems Customer Support Center XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Before contacting service, make note of the following: • Status code numbers and messages which appear on the keyboard/display •...
Page 135: Xerox Customer Documentation Catalog
Xerox Documentation and Software Services (XDSS) Operator training XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS To contact the Xerox Printing Systems Customer Support Center, call: 1-310-333-0501 (U. S. only), between the hours of 5:00 a.m. and 5:00 p.m., Pacific time.
Page 136: Xerox Customer Education
XEROX SUPPORT SERVICES Xerox Customer Education Xerox Font Center XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Xerox offers classes and tutorial documents on various topics relating to printing systems and document production. For information about Xerox training courses, or to receive a catalog, call Xerox Customer Education at 1-800-445-5554 (U.
Page 137: Glossary
The documentation set also includes an electronic version, the DocuPrint NPS Interactive Customer Documentation CD. Refer to the “Xerox support services” appendix of this guide for information on how to order these and other publications. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 138: Related Publications
RELATED PUBLICATIONS XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 139: Novell Netware Overview
Novell NetWare overview Print queues XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS DDocuPrint NPS on a Novell This chapter provides a brief overview of Novell NetWare, and describes some of the considerations you must make before the service representative installs DocuPrint NPS on a Novell network.
Page 140: Queue To Printer Relationships
DOCUPRINT NPS ON A NOVELL NETWORK Queue to printer relationships PCONSOLE XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Novell NetWare allows for flexibility in setting up different printing configurations. Multiple queues and printers can be associated in different ways to meet different needs, such as the following: •...
Page 141: Print Server (Pserver)
Print server (PSERVER) Job parameters Using Novell forms to specify virtual printers XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS DOCUPRINT NPS ON A NOVELL NETWORK A Novell print server (PSERVER) is a combination of hardware and software that takes ready-to-print jobs from the print queue and sends them to the printer.
Page 142: Remote Printer (Rprinter)
DOCUPRINT NPS ON A NOVELL NETWORK Remote printer (RPRINTER) XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • If a Novell user wishes to access a given virtual printer, a form with the same name as the virtual printer must be defined by the NetWare administrator.
Page 143: Docuprint Nps As A Print Server Or As A Remote Printer
DocuPrint NPS as a print server or as a remote printer Choosing a Print Server or Remote Printer Configuration XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS DOCUPRINT NPS ON A NOVELL NETWORK The RPRINTER does not have access to the queue or the data for a job in the queue.
Page 144 DOCUPRINT NPS ON A NOVELL NETWORK XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • The setting of the Novell banner pages switch operates successfully using PSERVER (this toggles the ElideHeader attribute). If Banner Page is requested with RPRINTER, DocuPrint NPS...
Page 145: Configuring Docuprint As A Pserver
DocuPrint NPS is connected. Novell configuration Configuring DocuPrint as a PSERVER XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS DOCUPRINT NPS ON A NOVELL NETWORK Table 4-1 lists the differences between DocuPrint NPS as a print server or as a remote printer.
Page 146 DOCUPRINT NPS ON A NOVELL NETWORK XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS — Define the printer per the naming convention suggested by NPS. — Select DEFINED ELSEWHERE. — From the Print Server window, configure a printer for PSERVER using the Printer Configuration option.
Page 147: Configuring Docuprint As An Rprinter
Configuring DocuPrint as an RPRINTER XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS DOCUPRINT NPS ON A NOVELL NETWORK In the following illustration, the queue, virtual printer, and specified form are configured with the same name. The user sends a print job...
Page 148 DOCUPRINT NPS ON A NOVELL NETWORK D-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS • After installation, change from PSERVER to RPRINTER as follows: — Sign on to privilege as an administrator. — Type Configure to specify the printer configuration.
Page 149 Supporting DocuPrint NPS on a file server XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS DOCUPRINT NPS ON A NOVELL NETWORK There are a number of tasks you perform on the file server to support the DocuPrint NPS as either a print server or a remote printer: •...
Page 150 DOCUPRINT NPS ON A NOVELL NETWORK D-12 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 151 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS This glossary contains a list of terms for working with the Xerox DocuPrint 96/4635/180 printing systems, and a definition of each. Paper size measuring 297 by 420 mm.
Page 152 GLOSSARY-2 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS In the binary numbering system, either of the characters 0 or 1. The bit is the basic unit of information with which a computer works. It can take the form of a magnetized spot, an electric pulse, a positive or negative charge, etc.
Page 153 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS byte Fixed number of bits (in data processing, usually 8) operated upon as a unit. A byte may represent a character, a machine instruction, or some other logical unit of information.
Page 154 GLOSSARY-4 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Characteristic of computer equipment permitting one device to use the same information or programs as another device without conversion or code modification.
Page 155 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Printer Controller task that translates print data from the PDL command file into a bitmap image of the page to be printed. default Predefined value the system uses when another value is not provided.
Page 156 GLOSSARY-6 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Network standard consisting of a coaxial cable or twisted pair and associated components for connecting workstations to each other, to file servers, and to peripherals. This communication system enables workstation users to share information and services.
Page 157 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS flag Small indicator marking the occurrence of an event or the existence of a certain condition while the program is executing. font...
Page 158 Internet Protocol (IP) address GLOSSARY-8 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Programming language consisting of words and symbols that are close to normal English and, therefore, readily understandable by the user. High-level source languages are used for most commercial programs.
Page 159 Local Area Network (LAN) logical page XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS JIS B4 A paper size measuring 257 by 364 mm used in Japan. Print data and attributes required for processing and printing a document.
Page 160 GLOSSARY-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS The movement of paper through the printer in the direction of the paper length (the longer side of a sheet of paper). See also short- edge feed.
Page 161 Device used with a computer or workstation, usually for input or output. Printers, modems, and the IPS/NPS cartridge tape drives are examples of peripherals. platform Combination of hardware and operating system software. XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS GLOSSARY-11...
Page 162 GLOSSARY-12 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Orientation of print lines or the top of an illustration parallel to the short edge of the paper. Page description language developed by Adobe Systems, Incorporated.
Page 163 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS GLOSSARY-13 Raster output scanner. A motor–driven laser scanning system. Solid-state memory for programs. It cannot be rewritten. A small electromagnet that reads, writes, and erases data in the form of magnetic dots on the surface of an external storage medium, such as a magnetic disk.
Page 164 GLOSSARY-14 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS syntax Rules governing the structure of expressions in a programming language. System response to a mistake in the entry of a command.
Page 165 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS GLOSSARY-15 Operating system that runs on DECStations. It consists of a hierarchical system of commands, shells, files, and directories. See also operating system.
Page 166 GLOSSARY GLOSSARY-16 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...
Page 167 8-4 reporting, 8-4 bypass transport description, 3-6 dimensions, 6-13 paper path, 6-15 service access, 6-14 specifications, 6-12–6-16, 6-31 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS grid, A-14 6-28 interval, 4-8 2-6–2-7 Index cables locations, 7-2...
Page 168 E13B series, 1-8 PCL 5, 2-10 PostScript, 2-9 framing type, Ethernet, 4-10 fuser INDEX-2 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS agent, A-12, A-21 shield, A-12, A-21 hardware components, 5-8 configuration, 3-4–3-5 controller components, 2-1, 5-8 printer components, 6-29–6-31...
Page 169 Novell NetWare, 4-12 network information, 1-2, 4-9–4-10 PCONSOLE, D-2 print queues, D-1–D-2 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS PSERVER, D-3–D-9, D-11 remote printer (RPRINTER), D-4–D-11 virtual printers, D-3 NPS, 1-4 operating systems supported, 1-5...
Page 170 1-4, 4-2–4-3 installation customer, 8-2 Xerox, 8-2 Xerox, 1-4, 4-1–4-2 INDEX-4 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS retry count, specifying, 4-9 root password, 4-8 router, default, 4-8 RPRINTER, D-4–D-11 safety hotline, iv...
Page 171 Xerox Customer Education, B-4 Xerox Customer Parts and Product Support Center, A-22 Xerox Customer Service Support Center, B-1 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS Xerox Documentation and Software Services (XDSS), B-3 Xerox Font Center, B-4...
Page 172 INDEX INDEX-6 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS...

This manual is also suitable for:

Docuprint 96 nps Docuprint 4635 nps

Xerox DocuPrint 180 NPS Installation Planning Manual

1 Product Overview

2 Controller Components and Options

3 Printer Components and Options

4 Preparing for Installation

5 Controller Specifications and Requirements

7 System Connections

8 Installation

Supplies

Xerox Support Services

Glossary

Index

Related Publications

Quick Links

Need help?

Questions and answers

Related Manuals for Xerox DocuPrint 180 NPS

Summary of Contents for Xerox DocuPrint 180 NPS

This manual is also suitable for:

Table of Contents