Tray Management and Settings
Tray Management Settings and Tray Paper Settings are used to configure the paper tray settings and
media.
Tray Management Settings
1.
Press the Menu button on the control panel.
2.
Press the up/down arrows to highlight the Tray
Management option. Press OK.
3.
The following Tray Management settings are available:
Option
Paper Source
Load Paper Timeout
Inch/Metric Defaults
Paper Size Substitution
Description
Sets the paper tray to be used
for print jobs. If the paper source
is set to Auto, the printer
automatically selects the paper
source based on the requested
size.
When a tray is opened and
closed the Tray Information
screen is displayed asking the
user to confirm the size and type
of the paper loaded in the tray.
This feature enables the
Administrator to set the length
of time the Tray Information
screen is displayed.
Enables you to set the machine
to display measurements either
in millimeters or inches.
Enables the machine to
automatically substitute
common US and metric paper
sizes when printing.
Paper and Other Media
Settings
•
Auto
•
Tray 1 (Bypass)
•
Tray 2
•
Tray 3
•
Tray 4
•
Tray 5
•
Tray 6
•
None
•
1 Min
•
3 Min
•
5 Min
•
10 Min
•
1 Hour
•
24 Hours
•
Inches
•
Millimeters
•
On
•
Off
Xerox Phaser 4600/4620
User Guide
59