English
10
Problem
Dirty water and impurities
come out of the soleplate.
Water flushes out of the
soleplate.
The Calc-Clean process
does not start.
Possible cause
Impurities or chemicals
present in the water have
deposited in the steam vents
and/or soleplate.
You have accidentally started
the Calc-Clean process
(see chapter 'Cleaning and
maintenance').
You have not pressed the
CALC-CLEAN button for
2 seconds until the appliance
started beeping.
Solution
Perform the Calc-Clean process regularly (see
chapter 'Cleaning and maintenance').
Switch off the appliance. Then switch it back
on again. Let the iron heat up until the 'iron
ready' light lights up steadily.
See chapter 'Cleaning and maintenance'.