Ethernet; Port Specifications And Connection - Panasonic VL-W1 Series Setup And Maintenance Manual

5-3 Ethernet

5-3-1 Port specifications and connection

To control the laser processing machine by using Ethernet communication, use an Ethernet port on the rear of the
controller.
Light up color Description
Green Lights up while 1000 BASE-T Management port is in link-up state.
Orange Blinks while there is activity on this port.
• Although the maximum length of cables connecting devices permitted by the standards of Ethernet is 100m, in order to
prevent communication failure due to noise or breakdown of the device, it is recommended to keep the length to 10m or
less.
• If Ethernet is not used for the external control, connect nothing to the Ethernet port.
126
Rear of controller
ME-VLW1-SM-8
Green LED Orange LED
RJ-45 8-pole connector