3-3-3 Screen selection
The display screen is switched by clicking screen names on the right menu.
Select the screen mode between Run or Setting. Depending on the selected mode, available screen buttons appear on the
right menu.
• With a password set in the environment setting screen, the password is required to change the screen mode from "Run"
to "Setting".
• Under the remote control mode, only Operation monitor is available.
• The password function is designed for the purpose to prevent a wrong configuration or unintended operation. You cannot
use this password for security purpose.
When password is forgotten
If you have configured the password on the environment setting screen, the password is required to change the screen
mode from "Run" to "Setting".
If you have forgotten this password, confirm the password according to the following procedures:
1.
Turn OFF the power of laser processing machine.
2.
Turn ON the DIP switch No. 4 on the rear of the controller.
The access to the setting mode is unlocked.
3.
Turn ON the power of laser processing machine.
72
ME-VLW1-SM-8
Screen mode selection
Screen selection