Table of Contents
Advertisement
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
-> Display on VAS 5051 following adaption:
Example:
1 -
Channel 62
Value 5 saved
-
Terminate function "10 - Adaption" by touching ◂ key.
3.12 - Input values on dash panel insert replacement
The following items must always be heeded on replacing dash panel insert:
Perform the following before replacing dash panel insert:
-
Use measured value blocks 010...140 to read out values in old dash panel insert which have to be transferred
to new dash panel insert.
-
Before replacing, note down mileage count/mileage display value in measured value block 010 (display zone
4) => Page
66
and enter when prompted.
Note:
Service display and mileage counter are adapted in miles in countries wheredistances are measured in miles.
Perform the following after replacing dash panel insert:
-
Encode dash panel insert => Page
and
-
Enter mileage => Page
-
Enter language version for driver information system (DIS)
=> Page
80
-
Correct fuel consumption indicator => Page
-
Correct fuel gauge sender resistance range => Page
-
Correct engine speed level => Page
-
Enter oil grade => Page
-
Enter mileage since service => Page
-
Enter days since service => Page
-
Enter maximum mileage prior to service => Page
-
Enter maximum time interval prior to service => Page
-
Enter total consumption (petrol engines only) => Page
-
Enter amount of soot in engine oil (diesel engines only)
=> Page
99
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
-
Enter thermal load (diesel engines only) => Page
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-
Set ambient temperature display/radio clock/dash panel insert illumination configuration => Page
-
Enter control units using drive train data bus => Page
-
Enter control units using convenience data bus => Page
-
Enter control units using information data bus => Page
and
-
Perform immobilizer adaption after replacing dash panel insert
=> Page
130
-
Perform matching of vehicle keys => Page
108
01 - Self-diagnosis
60
81
78
88
(only if fixed value changed)
96
90
91
150
(only if fixed value changed)
87
(only if fixed value changed)
94
95
98
101
102
104
105
85
Advertisement
Table of Contents
