Table of Contents
Advertisement
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
Adaption channel 43 - Maximum mileage prior to service
This function can be used to specify a maximum mileage for the service display in the dash panel insert.
-> Display on VAS 5051:
1 -
Enter channel number
-
Use keypad -2- to enter "43" for "Adaption channel 43" and confirm by touching Q key.
-> Display on VAS 5051:
1 -
Channel 43
Read and test
4 -
Moving bar positioned on current adaption value
Notes:
◆ Information on applicable specifications:
=> Maintenance
◆ Adaption value entered for respective engine version must coincide with value in table => Page
◆ The respective specification can only be entered in steps of 1000 km; the display is thus also in 1000 km.
◆ Adaption is implemented in miles in countries where distances are measured in miles.
-
Use moving bar to change adaption value =>"A - Changing adaption value with moving bar", Page
Or
-
Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page
75
.
-
Enter 5-digit adaption value. Use "0" to fill up empty spaces.
Example:
Specification: 30000 km
Keypad entry: 00030
Note:
Fault message "Function unknown or cannot be implemented at present" appears if an implausible value is
entered.
94
01 - Self-diagnosis
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
46
.
74
.
Advertisement
Table of Contents
