Table of Contents
Advertisement
Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
◆ The respective specification can only be entered in one-day steps; the display is thus also in days.
-
Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page
75
.
-
Enter 5-digit adaption value. Use "0" to fill up empty spaces.
Example:
Specification: 730 days
Keypad entry: 00730
Note:
Fault message "Function unknown or cannot be implemented at present" appears if an implausible value is
entered.
-> Display on VAS 5051 following adaption:
Example:
1 -
Channel 44
Value 730 saved
-
Terminate function "10 - Adaption" by touching ◂ key.
Adaption channel 45 - oil grade
Notes:
◆ Oil used must be re-adapted following manual service reset.
96
01 - Self-diagnosis
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Advertisement
Table of Contents
