Table of Contents
Advertisement
Adaption channel 48 - thermal load
Note:
This adaption channel is only used for vehicles with diesel engine.
-> Display on VAS 5051:
1 -
Enter channel number
-
Use keypad -2- to enter "48" for "Adaption channel 48" and confirm by touching Q key.
-> Display on VAS 5051:
1 -
Channel 48
Read and test
4 -
Moving bar positioned on current adaption value
Notes:
◆ Value given represents a comparison value (0 - 600) for the service display.
◆ The value displayed is an arithmetic value for the thermal loading of the engine oil referenced to a distance
of 100 km.
◆ Dash panel insert replacement => Page
-
Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page
75
.
-
Enter 5-digit adaption value. Use "0" to fill up empty spaces.
Example:
Electrical system Self-diagnosis - Edition 02.2002
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
108
.
Audi A3 1997 ➤
101
3.11 - Adaption
Advertisement
Table of Contents
