Audi A3 1997 Service Manual page 112

Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
-> Display on VAS 5051:
1 - Channel 62
Read and test
4 - Moving bar positioned on current adaption value
Notes:
◆ New dash panel insert is adapted to value "0".
◆ Current adaption value for channel 62 can be read out as of Model Year 2002 in measured value block 018
=> Page 69 .
◆ Following adaption, control units using communication data bus are displayed in measured value block 140
=>Page 70 . Dash panel insert with CAN capability is not displayed in measured value block 140.
◆ Dash panel insert replacement => Page
Vehicles up to Model Year 2001:
Control units using information data bus are adapted by entering the following values:
Information data bus control units
Dash panel insert and navigation NS-Low
Dash panel insert and navigation RNS-D
(screen navigation)
Dash panel insert and telematics/permanently
installed telephone with multi-function steering
wheel
Dash panel insert, telematics/permanently in‐
stalled telephone with multi-function steering
wheel and navigation NS-Low
Dash panel insert, telematics/permanently in‐
stalled telephone with multi-function steering
wheel and navigation RNS-D (screen naviga‐
tion)
Vehicles as of Model Year 2002:
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
Control units using information data bus are adapted by entering the following values:
with respect to the correctness of information in this document. Copyright by AUDI AG.
Information data bus control units
Dash panel insert and radio with CAN capability
1)
Dash panel insert and permanently installed tel‐
ephone 2) with multi-function steering wheel 3)
Dash panel insert, radio with CAN capability 1)
and permanently installed telephone 2) with
multi-function steering wheel 3)
106
01 - Self-diagnosis
108 .
Code
4
5
10
14
15
Code
1
2
3