Audi A3 1997 Service Manual page 109

-> Display on VAS 5051:
1 - Channel 60
Read and test
4 - Moving bar positioned on current adaption value
Notes:
◆ Current adaption value for channel 60 can be read out as of Model Year 2002 in measured value block 017
=> Page 69 .
◆ Following adaption, control units using drive train data bus are displayed in measured value block 125
=>Page 70 . Dash panel insert with CAN capability is not displayed in measured value block 125.
◆ Dash panel insert replacement => Page
Control units using drive train data bus are adapted by entering the following values:
Drive train data bus control units
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
Engine and dash panel insert with immobilizer II
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Engine and dash panel insert with immobilizer III
1)
Engine, automatic gearbox and dash panel in‐
sert with immobilizer III 1)
1) Immobilizer III is identified by value "4" in adaption channel 91
- Change adaption value by means of direct entry => "B - Changing adaption value by means of direct entry",
Page 75 .
- Enter 5-digit adaption value. Use "0" to fill up empty spaces.
Example:
Desired input: 1027 for automatic gearbox
Keypad entry: 01027
-> Display on VAS 5051 following adaption:
Example:
1 - Channel 60
Value 1027 saved
- Terminate function "10 - Adaption" by touching ◂ key.
Electrical system Self-diagnosis - Edition 02.2002
108 .
Code
0
1025
1027
Audi A3 1997 ➤
103
3.11 - Adaption