Audi A3 1997 Service Manual page 80

Audi A3 1997 ➤
Electrical system Self-diagnosis - Edition 02.2002
A - Altering adaption value by means of moving bar
-> Display on VAS 5051:
- Shift moving bar -5- in required direction or touch area next to bar, thus causing it to move in the desired
direction.
- Touch "Save" key -4-.
Note:
If "Save" key is not displayed, keypad must be used to make direct entry=> Page
-> Display on VAS 5051:
1 - Channel X
Save
2 - Text display for channel selected
or
No display
4 - Original value X
New value X
- Confirm new adaption value by touching "Accept" key -3-.
-> Display on VAS 5051:
1 - Channel X
Value X saved
- Terminate function "10 - Adaption" by touching ◂ key.
74
01 - Self-diagnosis
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
75 .