Table of Contents
Advertisement
Sequence of operations
-
Start immobilizer self-diagnosis => Page
-> Display on VAS 5051:
-
From list -1- select diagnosis function "08 - Reading measured value block".
-> Display on VAS 5051:
1 -
Enter display group
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
-
Use keypad -2- to enter required three-digit display group number
with respect to the correctness of information in this document. Copyright by AUDI AG.
=>List of display groups, Page
-> Display on VAS 5051:
1 -
Reading measured value block
2 -
Display zone 1
Display zone 2
Display zone 3
Display zone 4
3 -
Display group X
Notes:
◆ Display remains blank if a display zone is not used.
◆ Proceed as follows to switch to a different display group:
Display group
Up
Electrical system Self-diagnosis - Edition 02.2002
140
.
148
and confirm entry by touching Q key.
VAS 5051
Press s key
Audi A3 1997 ➤
5.8 - Reading measured value block
147
Advertisement
Table of Contents
