Plot Nesting Using The Web Printer Manager Tool; Starting The Web Pmt; Entering The Printer Password - Xerox 8850 System Introduction

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction
Plot Nesting Using the Web Printer
Manager Tool

Starting the Web PMT

When accessing the Web PMT, you must have a working connection
between your computer and the printer's Controller. To access the Web PMT
perform the following steps:
1. Start your Netscape 4.0 or Internet Explorer 4.0, or newer, Web browser.
If your browser starts up in the Mail or News mode, go to the Browser
mode.
2. In the browser URL box enter http:// followed by the printer's IP address.
If you don't know the printer's IP address, see your System Administrator
or the test print set produced at the time of your printer's installation.
NOTE: Although the Web PMT is browser independent, the appearance
of Web pages may vary slightly between browsers. You navigate the
Web PMT as you would any Web site. Only one page is displayed at a
time. Use the hypertext links within a page to navigate to other pages.
You can use the browser Back and Forward buttons to go back and
forth between the previous pages and the current page.

Entering the Printer Password

When you first access the Web Printer Manager Tool, the Main Page
displays. The Main Page contains a Title Line, a Main Menu (hypertext links
to other pages on the Web PMT site), a Status Area and a Job Queue List.
If you need to change any of the printer's default parameters, you must first
enter the printer password on the SESSION SETUP page. To do so, click on
the SESSION SETUP hypertext link. For more information on entering the
printer password, see the Quick Start or Session Setup sections of the Web
Printer Manager Tool User Guide.
Continued on next page.
26