Xerox 8850 System Introduction page 60

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction
Printed Error Code Description
21080300 No results available from Floppy Disk Controller for Sense Interrupt
command.
210F0100 No response from Floppy Disk Controller to Seek command.
210F0200 Floppy Disk Controller timed out executing Seek command.
210F0400 Floppy Disk Drive seek did not complete.
210F0500 Floppy Disk Drive seek failed.
21C50100 No response from Floppy Disk Controller to Write Data command.
21C50300 No results available from Floppy Disk Controller for Write command.
21C50500 Wrong track found during Write command.
21C50600 Floppy Disk Controller reported Write command was invalid.
21C50700 Bad disk found during Write command.
21C50800 Data FIFO under run during Write command.
21C50900 Sector not found on disk during Write command.
21C50A00 Data CRC error detected during Write command.
21C50B00 Address Field CRC error detected during Write command.
21C50C00 Data Field missing during Write command.
What To Do About Printed Error Code
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
Call for Service.
52