Xerox 8850 System Introduction page 86

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction
Printer Feature
Print Job Input
Host Interfaces
Network Protocols
Automatic Active Port Sensing
Job Spooling/Queuing
Job Queue Management
Print Job Processing
Data Formats
Job Control Language
Color Support
Automatic Format Recognition
Palettes and Patterns
Extended Processing Options
Copy Job Input
Scanner
Copy Job Priority/Concurrency
Description/Specifications
Serial, Bi-directional 1284 Parallel, VPI, Ultra SCSI, 10/100 T/TX Ethernet
TCP/IP with 10/100 Ethernet Port
Yes
Internal to controller: 143 MB+ hard disk
Single prioritized queue, adjustable pre and post-render priority, job canceling, queue monitoring, resource based
scheduling
CalComp 906/907/PCI, HP-GL (HP7585/6), HP-GL/2, HP-RTL, TIFF 6.0, Navy TIFF (NIRS), CALS I & II, CGM, VDS
(VRF, Block Raster, Compressed Raster, VOF), Versatec Raster/Green Sheet, XES 150 Emulation, VCGL, C4,
FileNET, JPEG, optional PostScript 3 with PDF
HP PJL & Versatec 150 Escape Sequences
Supports all color formats of the non-PostScript data formats.
Raster Imaging: Cluster dot halftoning at 45 degree screen angle supporting 256 gray levels.
Vector Rendering: Advanced stochastic halftoning technique supporting 256 gray levels.
Two user-selectable rendering options are available: Area Optimized, Line Optimized
Yes
8 User definable pen palettes, 1 read-only Factory default palette, specifying pen color, width, and pattern for up to
256 pens.
64 patterns - 33 shading patterns + 16 "random" patterns + 15 user definable patterns
Autoscaling, Autorotation, Auto Size Detect, Banner Sheets, Rotation (0, 90, 180, 270), Scaling (10% - 999%),
Justification, Margins, Plot Stamps, Labeling, Page Composition/Plot Overlay, Mirror Image, Plot Nesting
Auto-switching w/ selected print mode. Copier input from Synergix Scan System through IEEE 1394 interface.
Copy/print Resolution from 200 dpi to 400 dpi at speeds from 2.0 ips to 4.0 ips. Scanning resolution from 100 dpi to
400 dpi at speeds up to 8 ips, depending on whether line, photo, or mixed print mode is used.
User-selectable priority for inserting copy jobs in internal print queue; interrupt current print job to copy or insert copy
job after current print job. If print job not interrupted, supports concurrent scanning and printing.
78