Xerox 8850 System Introduction page 67

Appendix 1 (continued)
Controller Firmware
•
Control Panel Lockout secures the control panel so that an access code
is required to access certain features.
• Media Mismatch queuing routes any page of a job for which the proper
paper type or size is not loaded to a separate queue. Other pages or jobs
compatible with the loaded paper type or size continue to completion.
•
Bi-directional Capabilities of the Windows RTL/GL2 Drivers communicate
with the Controller to determine the feature set to display.
• 8825 Digital Solution software licenses are available for Job Accounting
and Scan-to-Net features. These software licenses are available by
calling or mailing a request along with payment to XES. The proper
licensing package will be forwarded for easy uploading to the printer from
your workstation.
• A Net Port Monitor file is included with Windows 95/98/ NT 4.0/2000
drivers. The Net Port Monitor replaces DigiLPR for Windows 95 and the
LPR Port for Windows NT 4.0.
•
Job Accounting keeps track of which accounts have accessed the printer
and scanner, as well as the amount of media used for each account.
The system administrator creates accounts for the users. Refer to the
Account Management Tool Administrator's Guide for details.
• Plot Nesting allows the most advantageous use of media. It arranges
single or multiple page jobs on the same output media to minimize waste.
The Page Composition feature can be used to place multiple pages in
more than one row, while making selections for the individual documents
regarding scaling, media size, location of labels or stamps, etc.
•
PDF files are submitted to the Controller over the Ethernet, serial, or
parallel ports. PostScript must be enabled.
• Pixel Preservation (fine line preservation) is available for reduction
copying at the scanner. This selection is made by selecting the Menu
key > Configuration > Copy Options > Imaging > Line Mode Line
Preservation.
•
The Merge Control Default feature determines how the pixels of
intersecting lines or graphics will be shown in your printed job. The OFF
setting will have the lines layer on top of each other. The ON position
XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction
causes an equal color of overlapping lines. This feature is located in your
printer user interface at Utilities > Setup Printer > Emulations > HPGL >
Mode=HPGL2 > Merge Control Default.
Synergix Scan System
•
Documents can be scanned to be printed or retrieved through the
network.
•
Media options (e.g., media location, media type, image quality) and
output format are selected through menu choices or buttons on the
user interface.
•
Job accounting can be used to record copying and scanning
activities.
•
4 ips standard scanning speed with XES Synergix 8830/8850 Digital
Solution. Feature key upgrade from 2 ips to 4 ips with 8825 Digital
Solution. A 4 to 2 ips downgrade option is available for the
8830/8850 Digital Solutions.
• Effective with Firmware Release 7.5, a new Color Enablement feature
key is available enabling Scanning-to-Net in color in TIFF and JPEG
formats. The printing of JPEG files is also enabled in Firmware Release
7.5.
59