Xerox 8850 System Introduction page 83

Print and Copy Job Rendering and Output
Long Plot
Multiple Copies
Electronic Collation
Finisher Support
Print Engine Interface
Accounting
User Interface
User Parameter Setup
Printer Control Panel Interface
AccXES Controller Interface
Copier Front Panel Interface
Remote Configuration
Localization
XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction
Print: Maximum of 80 feet in length.
Copy: Maximum of 100 feet in length
Print: 1 to 999, Copy: 1 to 999
Printer only: at least 12 E size page sets @ 64 MB (Assumes 10:1 compression rate.)
Copier/printer/scanner: 200 "typical" E size pages @ 64 MB w/ 4.5G HDD. (Note: that a system with a 1GB HDD running
PostScript may achieve less than 100 E size page sets. This is a marginal configuration.)
Generic Finisher Interface Folder.
8830 - Xerox P193R
8855 Family - Kip interface 8 rev G
Standard for 8830/8850. Optional feature key for 8825. Available for print, copy and scan jobs. Accounting of media use is
accomplished with the AccXES Account Management Tool running on a networked client workstation.
Up to 10 User Setups (printer parameter & processing defaults sets).
8825/8830/8850 – Status LEDs, simple keyboard, 2x40 character-based LCD.
8825/8830/8850 – See Printer Control Panel Interface or Web PMT.
Status LEDs, simple keyboard, 64x256 pixel graphical LCD, located on top of scanner.
Yes via HP PJL and Web PMT (Printer Manager Tool)
Printer UI and Copier UI: English, French, Italian, Spanish, German, South American Portuguese
75