Using Test Prints; Printer Configuration Test Print - Xerox 8850 System Introduction

Xerox 8850: user guide

Hide thumbs Also See for 8850:

Table of Contents

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction

Using Test Prints

The Configuration test print provides key information as to the current

Controller Configuration and Error Log, Print Engine Configuration and Error

Log, Installed Media, Communication Parameters (including port and protocol

enables), Network Interface Card Hardware (HW) addresses, status of Job

Accounting, and Scanner Configuration. When trouble arises, print out a

copy of the PRINTER CONFIGURATION Test Print to review error logs and

to see if all options and enables are correctly set.

The test print shown to the right is a sample from Firmware Release 6.1.

Your Test Print will be similar in appearance, but may be different in the data

displayed based upon your installed hardware, installed feature keys, and

firmware version.

Figure 16. Typical Printer Configuration Test Print

Table of Contents