Workcentre Pro Options - Xerox WorkCentre Pro 65 System Administration Manual

WorkCentre Pro Options

Xerox WorkCentre Pro System Administration Guide Supplement
The WorkCentre Pro can be used as a high speed scan
device. You can use Xerox CentreWare Scanning Admin
Wizard to configure your WorkCentre Pro as a network
scanner if you have a workstation on your network that has a
32 bit version of Windows. Details on this are available in the
document supplied with your WorkCentre Pro entitled
CentreWare Network Scanning Services Guide.
For installation instructions on connecting your WorkCentre
Pro as a scanner without the use of CentreWare, refer to the
section in the System Administration Guide entitled Scan
Setup without CentreWare.
The WorkCentre Pro also supports Network Accounting
software. For installation instructions on connecting to an
OfficeTrac server, refer to the section in the System
Administration Guide entitled Network Accounting.
The WorkCentre Pro supports Network Fax Solutions that
allow it to be used as a high speed fax device. For installation
instructions on connecting to a hardware or software solution,
refer to the section in the System Administration Guide
entitled Network Fax Solutions.
Page 1 - 3