Xerox WorkCentre Pro 635 Install Manual

Document WorkCentre Pro 635, 645, 657
Installing the Fuser Cleaner
The fuser cleaner is located in the black fuser housing.
CAUTION
The black colored fuser housing may be hot if the
machine was in use prior to this servicing.
1. Install the new Fuser Cleaner by positioning its left side first.
2. Place the Fuser Cleaner on the fuser housing from its front side
first. At this time, the guides of the fuser cleaner should be
positioned on the right side. Then, move the fuser cleaner to the
back side so that the guides of the fuser cleaner align with the
guides of the fuser housing.

Installing the Machine

Fuser Cleaner
076-1
076-2
1-11