Configuration Cloning - Xerox WorkCentre Pro 65 System Administration Manual

Configuration Cloning

Xerox WorkCentre Pro System Administration Guide Supplement
Configuration Cloning enables you to conveniently copy the
configuration settings and web-generated templates of one
WorkCentre Pro device and transfer them to other
WorkCentre Pro devices operating with the same version of
Controller software.
The administrator password is required to create a copy of the
Configuration Cloning settings on the source device.
Groups of settings are available for cloning selection,
depending upon the optional features installed on the source
device. For example, Scan Settings will be available for
selection only if the Scan to File optional feature is installed on
the source device.
After selecting the settings to be cloned, the configuration
cloning file is created (in .dlm format) by clicking the Clone
button and following additional on-screen instructions.
The configuration cloning file is then submitted to other
WorkCentre Pro devices as a print job, effectively transferring
and applying the selected source device settings to the
recipient devices.
NOTE: The cloning of option settings on the source device
does not install optionally-purchased features on the recipient
device. In other words, it is not possible to install optionally-
purchased features, such as Image Overwrite Security or E-
Mail, through cloning.
Depending upon the optional features installed on the source
device, some or all of the following Groups of settings will be
available for cloning.
Page 1 - 9