Xerox WorkCentre Pro 65 System Administration Manual page 23

Xerox WorkCentre Pro System Administration Guide Supplement
Job Management Settings.
• Templates (requires Scan to File option) This includes:
distribution templates.
To select the configuration settings to be copied and
transferred to other WorkCentre Pro devices, perform the
following steps.
Go to a workstation and...
1. Launch an Internet Browser.
2. Enter the TCP/IP Address of your WorkCentre Pro in the
Address or Location field and press Enter.
3. At the CentreWare Internet Services Home Page, Click
the Properties tab or click Properties in the directory
tree.
4. Click the plus symbol to the left of General Setup.
5. Click Cloning in the directory tree.
6. Follow the Cloning Instructions displayed on screen.
7. Click Clone.
8. Provide the administrator password, when prompted.
9. Specify a file type (.dlm format) and a folder to save the
file in, follow all displayed instructions.
10. Click Save.
11. Using a job submission method such as LPR on the com-
mand line or Internet Services, send the (.dlm format) file
as a print job to the recipient device to initiate the cloning
process.
Page 1 - 11