On Demand Overwrite From A Workstation - Xerox WorkCentre Pro 65 System Administration Manual

Page 1 - 16
Following completion of the On Demand Overwrite the
Network Controller will reboot. A confirmation sheet will print.
To verify the overwrite has completed view the Confirmation
Sheet, under Confirmation Details. The Job Information:
Status ESS Disk should read 'SUCCESS'. The Status Image
Disk should read 'SUCCESS'.

On Demand Overwrite from a workstation...

1. Launch an Internet Browser.
2. Enter the TCP/IP Address of your WorkCentre Pro in the
Address or Location field and press Enter.
3. At the CentreWare Internet Services Home Page, Click
the Properties tab or click Properties in the directory
tree.
4. Click Disk Overwrite in the directory tree.
5. Enter the administration id and password.
6. Click OK.
7. Click Start.
NOTE: A screen will appear to confirm that this procedure will
delete image data from the hard disks. Any existing jobs in the
queue will be deleted and overwritten. The machine will be
taken offline and will be unable to receive any incoming jobs.
Internet Services will not be available until the machine
reboots and comes back online.
The On Demand Overwrite will overwrite all image data on the
hard disks. The process takes up to 20 minutes.
To cancel the overwrite procedure press Abort. Enter the
current administrator password. The overwrite procedure
may have already started at this stage. Press Back to
continue with the overwrite.
Following completion of the On Demand Overwrite the
Network Controller will reboot. A confirmation sheet will print.
To verify the overwrite has completed view the Confirmation
Sheet, under Confirmation Details. The Job Information:
Status ESS Disk should read 'SUCCESS'. The Status Image
Disk should read 'SUCCESS'.
Xerox WorkCentre Pro System Administration Guide Supplement