Cd-Rom Drive; Figure 3-2: Inserting And Ejecting A Cd-Rom Disc - Advantech PPC-153T User Manual

3.3 CD-ROM Drive

To insert a CD-ROM disc, press the eject button of the CD-ROM
drive. The yellow activity light will flash and the front panel will
come out a short distance. Using your fingertips, hold the top and
bottom of the front panel and pull it outward to the very end. (See Fig
3-2.) Align the center hole of the CD-ROM disc with the center circle
of the CD-ROM holding plate. Press the transparent ring around the
center hole of the CD-ROM until you hear a click. Push the front
panel of the CD-ROM drive back to its original place.
To eject a CD-ROM disc, first ensure that the drive activity light is
off. Then press the eject button on the drive. When the disc pops out
of the drive, remove it and store it properly.
CD-ROM
holding plate
CD-ROM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Figure 3-2: Inserting and ejecting a CD-ROM disc

Chapter 3 Using the Panel PC
23