Xerox WorkCentre 7228 System Administrator Manual page 127

[POP3 Server Name]
Enter a server name if [By Server Name] has been selected for [POP3 Server Setup].
[POP3 Server Port Number]
Enter a value in the range from 1 to 65535. The default is 110.
Note: Do not use the numbers of any other ports.
[POP3 Server Check Interval]
Set the interval for checking the e-mail on the POP3 server.
[POP3 Server Login Name]
Enter the name to login to the POP3 server.
[POP3 Server Password]
Enter the same password twice in the [New Password] and [Re-enter Password]. If you do not set
the password, leave it blank and select Save.
[POP3 Receiving Password Encryption]
Select On (APOP) to encrypt the password, if desired.
c. Select Save.
d. Select Close.
127