What To Do Next - Xerox Document Centre 220 Getting Started

What to Do Next

To complete the setup of the DC220/230/332/340ST and your
network to enable scanning, perform the following steps.
1. Review the information in the Scanning Overview section of this
2. Refer to the appropriate chapter of this guide. Choose from:
3. OPTIONAL: If you are using Xerox CentreWare Internet
Companion to Getting Started with Scanning Services
chapter. Read the entire overview, including the Overview of
Repositories.
l
Set Up Scanning - NetWare. NCP (NetWare Core Protocol)
is available for Ethernet and Token Ring filing to a NetWare
server.
l
Set Up Scanning - FTP (File Transfer Protocol). FTP is
available for Ethernet and Token Ring (if PCI card installed)
and requires an FTP server running on a server or a
workstation.
Services to perform network scanning, refer to the Getting
Started with Internet Services guide.
Page 1 - 3