Xerox Document Centre 220 Getting Started page 25

13. Check the settings on the Configuration Sheet against the
14. It is recommended that you install the Visioneer PaperPort
15. Test scanning.
Companion to Getting Started with Scanning Services
information that was entered.
software, which is shipped on a CD ROM and included with
your DC220/230/332/340ST when you purchase Scanning
Services. This software should be installed at each client
workstation.
PaperPort allows you to annotate, organize, file and locate
scanned TIFF documents. After you scan a document at the
DC220/230/332/340ST, you can access PaperPort and retrieve
the scanned file within the PaperPort application. With
PaperPort links, you can transfer documents between the
PaperPort desktop and other applications and devices on your
workstation.
PaperPort contains links to several types of applications and
devices, including:
l
electronic fax applications
l
electronic mail ("E-Mail") applications
l
optical character recognition ("OCR") applications
l
printers
l
personal information managers ("PIM")
l
document control systems.
Install the PaperPort software from the PaperPort CD ROM.
Load the CD ROM, double-click on [Start], and follow the
instructions on the screen. This procedure will load PaperPort
onto your client workstation. It also provides access to
PaperPort software documentation. Take a few minutes to
familiarize yourself with both the PaperPort Install Guide and
On-Line documentation.
A. Place the document that you want to scan in the Document
Feeder, or place the first page on the Document Glass.
B. Select the [Scan] feature on the DC220/230/332/340ST
Touch Screen.
C. Scan jobs are based on templates that contain programming
selections for your job. Verify that [@default.xst] is
highlighted in the scan template list. This is the default
template.
D. If desired, select [Added Features] and modify the template
Page 2 - 9