Xerox Document Centre 220 Getting Started page 44

Problem
Protocol not running
Remote directory lock failed
Page 4 - 6
Corrective Action
A user tried a scanning operation with a
destination on the NetWare server.
l
The NetWare protocol is not currently
enabled. Enable it.
The repository that you are attempting to
send a job into with a scanning operation is
in use by another DC220/230/332/340ST.
Check the following:
l
The specified volume name is invalid.
l
The specified filing destination (path)
is invalid.
l
The destination disk is full, preventing
the creation of the remote directory.
Companion to Getting Started with Scanning Services