Features; Built-In Stapler; Capacity Handling; Use With Mailbox - Xerox DocuPrint N24 User Manual

Features

The finisher option can be installed only on console versions
of the DocuPrint N32 (i.e., versions which have the 2,500
Sheet Feeder). It has three output bins with a total maximum
capacity of 2,000 unstapled sheets, up to 667 unstapled sheets
per bin. There is stapling capability for all three bins. Stapled
output is delivered face down.

Built-in Stapler

The stapler can staple sets of up to 50 sheets. It has three
stapling modes (Front for portrait, Back for landscape, and
Dual for booklet mode). The customer-replaceable stapling
unit contains 5,000 staples which are packaged as a supply
item, in sets of three, for a total of 15,000 staples per package.
The finisher comes with one staple cartridge of 5,000 staples.

Capacity Handling

The finisher is programmed to ensure that there is enough
space remaining in the bin to output a job of from two to 50
pages. Up to 50 sheets can be stapled.
Stapled sets are kept in a compiler bin and ejected once a
complete set has been stapled. Output is delivered to the
finisher bins face down only.
The finisher has an elevator that positions one of the three
output bins to receive output from the compiler bin. The
finisher home position is when Bin 2 receives output from the
compiler bin. Finisher bin selection is made from the System
Menu at the User Interface, via PCL commands or from
printer drivers.

Use with Mailbox

The finisher is designed to be used with console versions of
the DocuPrint N32. Because it uses the same connector and
occupies the same location as the Mailbox, the same
DocuPrint N32 can not support both a finisher and a Mailbox
simultaneously.
7