Assa Abloy Corbin Russwin IN120 Installation Instructions Manual page 23

IN120 / IN220
FE6600/BL6600/MP6600 Series
Multi-point Lock
Installation Instructions
6 Installation Instructions (Continued)
m
IMPORTANT: Read the following before continuing with installation
Please refer to FM440 FE6600 & BL6600 MultiPoint Lock Installation Instructions before continuing
with this installation if (optional) Dogging Indicator is being installed.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019-2021 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Install Shield
a. Install shield (provided) over inside controller. (Figure 12)
b. Drill and tap door for #8-32 machine screws (provided).
NOTE: Slots face up
Fig. 12
23
FM455 04/21