Assa Abloy Corbin Russwin IN120 Installation Instructions Manual page 16

IN120 / IN220
FE6600/BL6600/MP6600 Series
Multi-point Lock
Installation Instructions
6 Installation Instructions (Continued)
f
Install Inside Rose and Inside Lever Assembly
1. Place inside rose flush against door surface and rotate first counter-clockwise to seat the threads,
then clockwise to securely tighten.
2. Slide lever onto spindle until fully seated. Be sure handle is horizontal and facing the hinge side of
the door. Push lever onto spindle so minimum gap is visible.
3. Tighten the set screw securely with a T20 Torx
4. Finish securely tightening (2) #12-24 lock body screws.
5. Before closing the door, test that the lever is functional and ensure smooth operation of the
latchbolt.
#12-24 screws
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019-2021 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Fig. 5
driver.
®
Inside of Door
Rose
Spindle
Set Screw
16
Inside Lever
FM455 04/21