Assa Abloy Corbin Russwin IN120 Installation Instructions Manual page 12

IN120 / IN220
FE6600/BL6600/MP6600 Series
Multi-point Lock
Installation Instructions
6 Installation Instructions
a Verify Hand and Bevel of Door
Stand on outside of locked door when determining door hand.
Left Hand
Hinges Left
Open Inward
b Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
Prepare door according to appropriate template. See www.intelligentopenings.com
Raceway for Power
(Optional)
*
Channel for Cat 5e
(or higher) cable
from hinge
Cable Hole
Outside Cylinder Hole
(only with cylinder
installation)
Lever Holes
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019-2021 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
LH LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
• Door Manufacturer's Template: 4740
• FE6600 / BL6600 / MP6600 Series Installation Instructions: FM440 (ships with product)
Outside of Door
Wood Door Preparation
*See Section IN220 (PoE) Wiring and Installation
Fig. 1A
RH
Right Hand
Hinges Right
Open Inward
Inside of Door
Through-bolt Hole
Through-bolt Hole
Mortise
Pocket
Fig. 1B
RHRB
Right Hand
Reverse Bevel
Hinges Right
Open Outward
Raceway for Power
(Optional)
*
Channel for Cat 5e
(or higher) cable from
hinge
Cable Hole
Inside of Lock Body
Wire Hole
Thumb Turn Hole
Lever Holes
12
FM455 04/21