IN120 / IN220
FE6600/BL6600/MP6600 Series
Multi-point Lock
Installation Instructions
6
Installation Instructions (Continued)
g
Outside Reader Installation
1. Orient the reader so the LED lens is at the top.
2. Feed the reader harness through the door (from outside to inside).
3. Install reader to the outside of the door by aligning mounting posts with the door preparation holes.
Hold the reader flush against door while ensuring proper alignment.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019-2021 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Fig. 6
17
FM455 04/21