Requirements; Installation And Setup - Mitel 6865i User Manual

WELCOME
Set paging*
•
*Availability of feature dependent on your phone system or service provider.

REQUIREMENTS

SIP-based IP PBX system or network installed and running with a SIP account created for the 6865i
•
phone.
Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer
•
Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended).
•
Category 5/5e straight-through cabling (Category 6 straight-through cabling required for optimum
•
Gigabit Ethernet performance).
Power source:
•
For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an Ethernet cable
–
to connect from the phone directly to the network for power (no 48V AC power adapter required if
using Power-over-Ethernet [PoE]).
For Ethernet networks that DO NOT supply power to the phone: Use only the GlobTek Inc. Limited
–
Power Source [LPS] adapter model no. GT-41080-1848 (sold separately) to connect from the DC
power port on the phone to a power source or Use a PoE power injector or a PoE switch.

INSTALLATION AND SETUP

If your System Administrator has not already setup your 6865i phone, please refer to the Mitel 6865i
Installation Guide for basic installation and physical setup. For more advanced administration and
configuration information, System Administrators should refer to the Mitel SIP IP Phones Administrator
Guide.
REQUIREMENTS
2