Requirements; Installation And Setup - Mitel 6863i User Manual

Welcome

Requirements

• SIP-based IP PBX system or network installed and running with a SIP account created for the 6863i phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server,
or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps).
• Category 5/5e straight-through cabling.
• Power source:
– For Ethernet networks that supply inline power to the phone (IEEE 802.3af ) use an Ethernet cable to connect from
the phone directly to the network for power (no 48V AC power adapter required if using Power-over-Ethernet
[PoE]).
– For Ethernet networks that DO NOT supply power to the phone:
Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no. GT-41080-1848 (sold separately) to con-
nect from the DC power port on the phone to a power source
or
Use a PoE power injector or a PoE switch.

Installation and Setup

If your System Administrator has not already setup your 6863i phone, please refer to the Mitel 6863i Installation Guide
for basic installation and physical setup. For more advanced administration and configuration information, System
Administrators should refer to the Mitel SIP IP Phones Administrator Guide.
2
41-001565-00 REV00 – 10.2014