Backlight; Live Dialpad; Enabling/Disabling Live Dialpad - Mitel 6865i User Manual

CUSTOMIZING YOUR PHONE
Use the
5.
key or 4 Select to save your selection.
Press the
6.

BACKLIGHT

The Backlight option on the IP phone allows you to set the backlight status on the LCD display to the
following:
Off: Backlight is always off.
•
Auto (default): Automatically turns on the backlight when the phone is in use, and then automatically
•
turns off the backlight when the phone is idle after a specified length of time.
Configuring Backlight Options
IP PHONE UI
Press on the phone to enter the Options List.
1.
Select Preferences.
2.
Select Display.
3.
Select Backlight.
4.
Use the
5.
Press the key or select
6.

LIVE DIALPAD*

The Live Dialpad option on the IP phone turns the live dialpad mode on or off. With the live dialpad
feature enabled, the 6865i IP phone automatically dials out and turns on handsfree mode as soon as a
dialpad/keypad key or programmable key is pressed. With live dialpad disabled, if you dial a number while
the phone is on-hook, lifting the receiver or pressing the initiates a call to that number.
: Availability of this feature is dependent on your phone system or service provider.
NOTE
You can enable/disable the live dialpad using the IP phone UI only.

ENABLING/DISABLING LIVE DIALPAD

IP PHONE UI
Press on the phone to enter the Options List.
1.
Select Preferences.
2.
Select Live Dialpad.
3.
Use the
4.
navigation keys to increase or decrease the amount of contrast on the screen.
navigation keys to navigate to Off or Auto.
key Set to save your selection.
navigation keys to navigate to ON or OFF.
LIVE DIALPAD*
30